How to Create Your Own Dog Mask – The Basics

How to Create Your Own Dog Mask – The Basics

In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can make certain that nothing will leak once you place the mask on. Be sure the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to site start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.

Then it is time to glue the mask on your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Make certain it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure the ears are flat and be certain it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your pet security, you will have to do some sanding to be certain it is safe on your dog. You can accomplish this by sanding off any excess paper which might have been removed from your mask.

LEAVE A COMMENT

Your email address will not be published. Required fields are marked *